***

Flexing it with Michael Mackie

31 ~ October 2011

Loading the flex

Loading the flex

Mackie showing the epoxy/carbon construction

Mackie showing the epoxy/carbon construction

Some fine oncave running off the stringer

Some fine oncave running off the stringer

Simon Anderson And Mackie getting ready for a surf. Mackie's flex gun and shortboard in the foreground

Simon Anderson And Mackie getting ready for a surf. Mackie's flex gun and shortboard in the foreground

Dimitrije Milovich slicing the snow on his Winterstick in '78 with Mackie's flextails and hand foiled wooden keels

Dimitrije Milovich slicing the snow on his Winterstick in '78 with Mackie's flextails and hand foiled wooden keels

Mackie on his yellow flex gun. Photo Greg Simitian

Mackie on his yellow flex gun. Photo Greg Simitian

Mackie carving the blue sidecut flex.

Mackie carving the blue sidecut flex.

Simon Anderson impressed by Mackie's designs - documenting them on his iphone.

Simon Anderson impressed by Mackie's designs - documenting them on his iphone.

This interview with Michael Mackie is an extract from the Lost in the Ether film/book project, released December 2010

Andrew: That whole Winterstick fish thing, how did you come across that?

Michael: I came across it from when I was a young boy looking at Surfing World Magazine. Somehow the article that Richard Palmer wrote stuck with me for all those years. Eventually through going snow boarding it coupled up with my fish boards, I thought that I’d try and deepen the swallows and flex the tails.

Andrew:  What attracted you to that design? There must have been something in Richard’s article that resonated with you.

Michael: Just the beautiful aesthetic of the snowboard that Milovich had made. I like the aesthetic of the swallowtail. Richard Palmer was basically showing the people in Australia snowboarding for the first time.

Andrew: What year was that?

Michael: 1979, I think the article came out in 1980 in Bruce and Hugh’s magazine.

Andrew: When did you start tinkering around with shaping those crossover designs?

Michael: 1996.

Andrew: Can you feel the similarities between this board and the Winterstick?

Michael: Yeah I can. Just from sinking the tail and riding off one pin at a time. You get a nice slice off either piece of the swallow and also the whip out of the tail - which you get out of a flexing snowboard. I can feel those similarities, because in powder snow you can push and sink the tail and whip out of your turns - the surfboard is in a softer medium (which is water) so you’re sinking and flexing the tail. The swallowtail seems to work.

Andrew: These other Fish that you’re doing, where did the inspiration for them come from?

Michael: It all came from toying with my own ideas at the start. They came from Skip Frye’s board, that one that Curren rode years ago at Jeffery’s. My brother-in-law Pete was pretty into me playing around with it and we just played around with it. It was just a private thing. Other guys became a little bit interested, but it didn’t really take off.

Andrew: Why did you put the side-cut into the rail?

Michael: That comes directly from the Dimitrije Winterstick.

Andrew: What do you think that does?

Michael: Well, you’re following the curve, so it gives you a little extra whip in and out of your turns. It gives you a little extra drive out of turns; it shortens up the arc a bit out of the end of your cutbacks. It flicks you - gives you a flick - it’s like a radius you’re turning off. It’s excellent off the wash and in that last hook, when you go into a roundhouse cutback - that’s where it really applies. Rodney Ball, he had all that kind of stuff in his boards, back in the 70’s, he called them Ski Tails. Like what Terry Fitz did with the sidecut in his Screwdriver. It all comes back from my childhood, and the interest in design - the whole gamut of design, so to speak.

To read more of this interview see:

The limited edition Lost in the Ether film/book project is available in the shop.

http://www.andrewkidman.com/shop/

And for work by Michael Mackie see:

http://www.mackiesurfboards.com.au/

Categories: Surfing


Single in the West

31 ~ October 2011

This single fin went over to West Oz during the winter. Shape and ink by yours truly. *See single splice in the surfboard section for dimensions and thoughts.

Glassing by Simon Jones.

Response to shape by the owner: “Just wanted to let you know that my board is magic, it takes me to places on a wave that no other board has before. This makes me very happy.”

Categories: Surfing


Some Winter Shapes

29 ~ October 2011

This board was shaped for my mate Brett in New Zealand. Keeping with the football themes he wanted it red and blue like the Owaka Rugby Union jumper. I painted his home break in the red panel in ink.
The board is based on Simon Anderson’s original ‘81 Thruster, with a flat bottom under the front foot that leads into a panel-vee that runs out through the tail. The vee stiffens the board up, whilst helping to get it on rail. The board was glassed and finned by Simon Jones. Test pilot was Brett’s son Jake, whom is obviously from New Zealand, cause he’s in boardies in the middle of winter.

Categories: Surfing


Page 1 of 1 pages